Connect to FMC via SSH to change the status to complete you need to execute the following commands Browse your FMC (Intelligence –> Sources) and remove the formerly stuck on parsing sources
Continue readingCategory: Cisco
Firepower Management Center – API Explorer – Bulk create hosts (Tested with FMC 6.6.5)
Browse the following URL Login and choose: Enter your Domain UUID (usually it is already filled) Click [Try it out] in the right top corner to enable editing the body field To bulk create hosts you also need to enable bulk –> set it to true To create multiple objects
Continue readingCisco Nexus: Scheduled Backup
Create Backup-Script on nexus Maybe you need to use another vrf. This depends on what vrf you configure on your Management-VLAN-Interface Create Task using Embedded Event Manager (EEM) Description snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1: check CPU-Load entry-val 12345: if CPU-Load is below 12345% poll-interval 86400: run actions every 86400 seconds Hint On
Continue readingCisco ASA: Reset password
Turn off appliance Connect console cable Interrupt boot process by pressing ESC to enter ROMMON-Mode (ROM Monitor Mode): View current config Change Config-Register to 0x41 Change password and reload
Continue readingCisco ASA: View Passwords, PSKs etc.
Via CLI (Command Line Interface) Via Web https://192.0.2.1/config
Continue readingCisco ASA: Enable ICMP-Inspection
If you are not able to ping the inside interface of the Cisco ASA icmp inspection is probably not enabled.
Continue readingCisco ASA: Configure bandwith throttling
Create access-list Class-Map anlegen Class-Map an Policy-Map binden By default the outside-policy is bound to the outside-interface. Otherwise you can bind it as described below: Policy-Map an interface binden
Continue reading